Reliable HPE7-A06 Exam Prep, Reliable HPE7-A06 Exam Voucher

Blog Article

Tags: Reliable HPE7-A06 Exam Prep, Reliable HPE7-A06 Exam Voucher, Latest HPE7-A06 Braindumps Pdf, HPE7-A06 Pass4sure, VCE HPE7-A06 Dumps

When preparing to take the HPE7-A06 exam dumps, knowing where to start can be a little frustrating, but with HP HPE7-A06 practice questions, you will feel fully prepared. Using our HPE7-A06 practice test PassExamDumps, you can prepare for the increased difficulty on HPE7-A06 Exam day. Plus, we have various question types and difficulty levels so that you can tailor your HPE7-A06 exam dumps preparation to your requirements.

Now we have PDF version, windows software and online engine of the HPE7-A06 certification materials. Although all contents are the same, the learning experience is totally different. First of all, the PDF version HPE7-A06 certification materials are easy to carry and have no restrictions. Then the windows software can simulate the real test environment, which makes you feel you are doing the real test. The online engine of the HPE7-A06 test training can run on all kinds of browsers, which does not need to install on your computers or other electronic equipment. All in all, we hope that you can purchase our three versions of the HPE7-A06 real exam dumps.

>> Reliable HPE7-A06 Exam Prep <<

HPE7-A06 - HPE Campus Access Switching Expert Written Exam –Trustable Reliable Exam Prep

With the rapid development of the world economy and frequent contacts between different countries, looking for a good job has become more and more difficult for all the people. So it is very necessary for you to get the HPE7-A06 certification with the help of our HPE7-A06 Exam Braindumps, you can increase your competitive advantage in the labor market and make yourself distinguished from other job-seekers. Choosing our HPE7-A06 study guide, you will have a brighter future!

HPE Campus Access Switching Expert Written Exam Sample Questions (Q43-Q48):

NEW QUESTION # 43
Refer to the exhibit.

A gateway cluster needs to be connected to the VSX-enabled switches where MC-LAG is configured What Is a possible constraint?

A. LLDP needs to be enabled to detect LACP-configured interfaces.
B. LACP is not supported during the initial provisioning and needs to be turned off.
C. The command lacp fallback is missing on the interface lag level.
D. lacp mode active needs to be configured on the gateways when usingstatic-activate" mode.

Answer: B

Explanation:
The question asks about a possible constraint when connecting an Aruba Gateway Cluster to upstream VSX switches using an MC-LAG.
* Scenario:Gateway Cluster acts as a single logical device forming an LACP LAG. The VSX switches are configured with MC-LAG, allowing the gateway cluster to bundle links across the two physical VSX switches.
* LACP & Initial Provisioning:LACP requires negotiation (exchange of LACP PDUs) between both ends of the link bundle to activate the LAG. During initial gateway provisioning (ZTP, OTP), the gateway might be in a minimal state without its full configuration, including LACP parameters. If the VSX switch ports are configured strictly for LACP active mode, the LAG might not form until the gateway is fully provisioned and running LACP. This lack of connectivity during provisioning is a constraint.
* Analysis of Options:
* A: lacp mode active is standard, but the issue is during provisioning, not runtime mode choice.
"static-activate" is unrelated.
* B: Theabsenceof lacp fallback could be the constraint. Fallback allows connectivity if LACP doesn't establish, which is useful during provisioning.
* C: LLDP is not required for LACP.
* D: Correctly identifies the constraint: Standard LACP required by the switch might not be supported or active on the gateway during its initial provisioning phase, potentially hindering the setup process. Workarounds like disabling LACP or enabling LACP fallback on the switch ports during this phase are often necessary.
* Conclusion:LACP incompatibility during the initial provisioning phase of the gateway cluster is a common constraint when connecting to switches requiring LACP for the LAG.
References:Aruba Gateway Installation Guides, AOS-CX MC-LAG Configuration Guide, LACP Standard (IEEE 802.3ad). This relates to "Connectivity" (9%) and "Network Resiliency and virtualization" (8%).

NEW QUESTION # 44
A customer hassot a requirement for VLAN 151 to be an isolated VLAN. A colleague has copied and pasted a partialconfiguration, but you do not achieve the desired outcome. This is the code that was added:
What should be added to the configuration before this code to achieve the desired result?

Answer: C

Explanation:
The customer requires VLAN 151 to be configured as an isolated Private VLAN. A partial configuration was added, but the desired outcome wasn't achieved. We need to determine which configuration snippet should be addedbeforethe (unspecified) partial configuration to correctly set up the Private VLAN structure.
* Private VLAN Configuration Fundamentals:
* APrimary VLANmust be defined. This VLAN carries traffic between promiscuous ports and ports in associated secondary VLANs.
* Secondary VLANs(either isolated or community) are associated with the primary VLAN.
* Ports are then mapped to either the primary VLAN (promiscuous ports, typically router/firewall connections) or a secondary VLAN (host ports). Isolated ports within thesameisolated VLAN cannot communicate with each other.
* Analyzing the Options (Assuming VLAN 15 is the intended Primary):
* A)
vlan 15
private-vlan primary
vsx-sync
This correctly defines VLAN 15 as the Primary Private VLAN. The vsx-sync command ensures this configuration is synchronized across a VSX pair (relevant if applicable). This is the necessary prerequisite before defining VLAN 151 as an isolated secondary VLAN and associating it with VLAN 15.
* B)isolated-vlan primary is incorrect syntax. The command is private-vlan primary.
* C)primary-vlan isolated 151 is incorrect syntax for defining either the primary or secondary VLAN type/association within the primary VLAN context.
* D)private-vlan isolated 151 within the vlan 15 context is incorrect syntax. The private-vlan isolated command belongs under the configuration of the secondary VLAN (VLAN 151 in this case).
* Conclusion:Before configuring VLAN 151 as private-vlan isolated and associating it, the primary VLAN must be defined. Option A correctly shows the command (private-vlan primary) under the intended primary VLAN's configuration (vlan 15) to establish it as the primary VLAN.
References:AOS-CX Security Guide (Private VLAN configuration steps and commands). This relates to the
"Switching" (19%) and "Security" (10%) objectives.

NEW QUESTION # 45
A Python developer could not modify the VLAN database on an AOS-CX switch through the REST API.
Which settings should the developer check first? (Select two.)

A. HTTPS settings
B. REST API settings
C. SNMP settings
D. local-user settings
E. SSH settings

Answer: A,D

Explanation:
A Python developer using the REST API cannot modify the VLAN database on an AOS-CX switch. We need to identify the first settings to check.
* REST API Requirements for Modification:
* HTTPS Server:The REST API operates over HTTPS, so the HTTPS server must be enabled on the switch (show https-server status).
* REST Interface:The REST API interface itself must be enabled (it usually is by default, check with show rest-interface).
* Authentication:The API client must provide valid credentials (username/password or token) for a user account configured on the switch.
* Authorization:The authenticated user account must have sufficient privileges to modify the configuration (e.g., belong to the built-in administrators group or a custom role with appropriate permissions). Check user details (show user <name>) and role permissions (show user roles).
* Analysis of Options:
* A. HTTPS settings: Essential for API communication. Check if enabled.
* B. SSH settings: Irrelevant to REST API.
* C. SNMP settings: Irrelevant to REST API.
* D. REST API settings: Check if enabled (show rest-interface), but it's usually enabled by default.
Less likely than A or E to be the initial problem.
* E. local-user settings: Crucial for both authentication (correct credentials used?) and authorization (does the user have modification privileges?).
* Conclusion:When a REST API modification fails, the most critical initial checks involve ensuring the API endpoint is accessible (HTTPS Server enabled - A) and that the user account being used for the API call has the necessary permissions (local-user settings, specifically privileges/roles - E).
References:AOS-CX REST API Guide, AOS-CX Security Guide (User Accounts, Roles, HTTPS Server configuration). This relates to "Security" (10%) and "Authentication/Authorization" (9%).

NEW QUESTION # 46
Exhibit.

After an initial setup of CX 8325 VSX configuration, the active gateway is set up for SVI 10. For testing purposes. SVI 10 on sw-aggi is shut down while traffic from the client connected to Edge-1 is initiated towards the default route.
What is the expected behavior white performing this test?

A. Traffic is potentially dropped between the client and the destination.
B. Traffic is forwarded over the ISL without the risk of dropped packets.
C. Traffic Is unaffected and a 50nsfailover time is expected for agg-sw2 to start traffic forwarding.
D. Traffic is dropped and vsx-sync will disable SVI10 on agg-sw2 automatically.

Answer: C

Explanation:
The question involves a VSX configuration with CX 8325 switches (agg-sw1 and agg-sw2) where SVI 10's active-gateway is set up. For testing, SVI 10 on agg-sw1 is shutdown, and traffic from a client connected to Edge-1 is initiated toward the default route. The task is to determine the expected behavior.
* Analysis of Options:
* Option A:Incorrect. Traffic is not dropped, as VSX ensures redundancy via the active-gateway on agg-sw2.
* Option B:Incorrect. Traffic does not traverse the ISL unnecessarily; agg-sw2 takes over directly.
* Option C:Correct. Traffic continues unaffected, with a 50ms failover time for agg-sw2 to assume forwarding responsibilities for SVI 10.
* Option D:Incorrect. Traffic is not dropped, and vsx-sync does not disable SVI 10 on agg-sw2; it ensures consistency.
* Why Option C is Correct:In a VSX cluster with active-gateway, both switches (agg-sw1 and agg- sw2) share a virtual IP and vMAC for SVI 10, allowing either to respond to ARP requests and forward traffic. Shutting down SVI 10 on agg-sw1 triggers agg-sw2 to take over Layer 3 forwarding, leveraging the active-gateway configuration. VSX's fast failover mechanism ensures a typical failover time of approximately 50ms, making the transition seamless for clients on Edge-1. The vsx-sync feature ensures SVI configurations remain consistent, preventing traffic disruption. This behavior aligns with HPE Aruba Networking's VSX high-availability design.
* Relevance to Certification Objectives:
* Network Resiliency and Virtualization (8%):Designing and troubleshooting VSX for high availability.
* Routing (16%):Ensuring seamless Layer 3 forwarding in VSX environments.
* Troubleshooting (10%):Diagnosing failover behavior in campus networks.
References:
HPE Aruba Networking AOS-CX Configuration Guide: VSX Active-Gateway and Failover.
HPE7-A06Study Guide: Covers VSX high-availability and failover times.
HPE Aruba Networking Technical Documentation: VSX Best Practices for Layer 3 Redundancy.

NEW QUESTION # 47
You want to use OSPF to advertise a only .16 summary route for the SVlsbelow to a neighbor In the same area (area 0).
Which configuration will achieve this?

Answer: B

Explanation:
The goal is to configure OSPF on a router so that it advertisesonlya 10.1.0.0/16 summary route for the specific SVIs (VLAN 11, 12, 13, assumed to be within the 10.1.x.x range) to its OSPF neighborswithin the same area (Area 0).
* OSPF Intra-Area Behavior:A fundamental principle of OSPF (link-state protocols) is that all routers within the same area must have an identical Link State Database (LSDB) for that area. This means all routers learn about all the specific networks (Type-1 Router LSAs, Type-2 Network LSAs) within their area. OSPFv2 doesnotsupport summarizing routes in a way that hides specific network LSAs from other routerswithin the same area. Summarization occurs only at area boundaries (by ABRs using Type-
3 Summary LSAs via the area range command) or for external routes redistributed into OSPF (by ASBRs using Type-5 External LSAs via the summary-address command).
* Analysis of Options:
* A) area 0 range 10.1.0.0/16:This command is used on an Area Border Router (ABR) to summarize routes originatingfromArea 0 when advertising theminto another area(e.g., the backbone). It does not affect LSA floodingwithinArea 0. It also includes redistribute connected, which is unrelated here.
* B) summary-address 10.1.0.0/16:This command is used on an Autonomous System Boundary Router (ASBR) to summarizeexternalroutes being redistributed into OSPF. It is not used for summarizing internal OSPF routes like SVIs defined within an OSPF area.
* C) & D) summary-address 10.1.0.0/16:Same issue as B; incorrect command for summarizing internal OSPF routes.
* E) area 0 range 10.1.0.0/16:Similar to A, this uses the area range command. It correctly shows the SVIs configured for OSPF Area 0 first. However, like A, this command performs inter-area summarization on an ABR and does not suppress the specific LSAswithinArea 0.
* Conclusion:The question asks for something that OSPFv2 cannot do: advertiseonlya summary route within the same area while suppressing specifics. Therefore, none of the configurations will achieve the exactstated outcome. However, if the question is flawed and intends to ask which configuration uses the correct command structure for summarizinginternalOSPF routes (even if only effective between areas), then the area range command is the relevant one. Both A and E use this command. Option E is slightly better structured as it shows the interfaces being added to OSPF Area 0 first. Assuming this is the intended direction despite the impossibility of the specific request, E is the most plausible choice among the given options.
References:RFC 2328 (OSPFv2), OSPF Configuration Guides for AOS-CX (explaining area range for ABRs and summary-address for ASBRs). This relates to the "Routing" (16%) objective.

NEW QUESTION # 48
......

There are three different versions of our HPE7-A06 practice braindumps: the PDF, Software and APP online. If you think the first two formats of HPE7-A06 study guide are not suitable for you, you will certainly be satisfied with our online version. It is more convenient for you to study and practice anytime, anywhere. All you need is an internet explorer. This means you can practice for the HPE7-A06 Exam with your I-pad or smart-phone. Isn't it wonderful?

Reliable HPE7-A06 Exam Voucher: https://www.passexamdumps.com/HPE7-A06-valid-exam-dumps.html

Our HPE7-A06 braindumps are updated and latest questions, the question and answer format will make it easier to prepare for the test, With HPE7-A06 PDF questions dumps, you can check out all the HPE7-A06 questions, and you will be able to prepare yourself for the real HPE Campus Access Switching Expert Written Exam , HP Reliable HPE7-A06 Exam Prep Spend no time, otherwise, you will pass on these fantastic opportunities, Reliable HPE7-A06 Exam Voucher provides certifications designed to grow your skills so you can exploit the opportunities made possible by Reliable HPE7-A06 Exam Voucher technology,you can demonstrate your expertise and validate your skills by getting relevant Reliable HPE7-A06 Exam Voucher certifications.

Presentation Patterns: Demonstrations Versus Presentations, The fact that Java HPE7-A06 Pass4sure is such a well-founded programming language has given it time to mature and find several specific facets of programming in which it remains unmatched.

HP HPE7-A06 PDF Dumps

Our HPE7-A06 Braindumps are updated and latest questions, the question and answer format will make it easier to prepare for the test, With HPE7-A06 PDF questions dumps, you can check out all the HPE7-A06 questions, and you will be able to prepare yourself for the real HPE Campus Access Switching Expert Written Exam .

Spend no time, otherwise, you will pass on these fantastic HPE7-A06 Pass4sure opportunities, Aruba Certified Professional - Campus Access provides certifications designed to grow your skills so you can exploit theopportunities made possible by Aruba Certified Professional - Campus Access technology,you HPE7-A06 can demonstrate your expertise and validate your skills by getting relevant Aruba Certified Professional - Campus Access certifications.

Then the expert team processes Reliable HPE7-A06 Exam Prep them elaborately and compiles them into the test bank.

Report this page

RELIABLE HPE7-A06 EXAM PREP, RELIABLE HPE7-A06 EXAM VOUCHER

Reliable HPE7-A06 Exam Prep, Reliable HPE7-A06 Exam Voucher